Planned Maintenance Agreement

MCP offers planned maintenance programs that are scheduled to match your equipment usage and equipment maintenance requirements. We offer this program for all cleaning equipment and we will perform the service on all brands.

Who needs planned maintenance?

If your operation is dependent upon a functioning piece of cleaning equipment, planned maintenance is a necessity. If you value long-term equipment usage, reduction of down-time and a lower cost of ownership, then you should have a planned maintenance agreement on your cleaning equipment.

My Machine is under Warranty, why do I need a PM?

All manufacturers offer warranty periods for the equipment that they offer, but not all repairs are subject to warranty. There are times where operator abuse or neglect can cause a failure to be outside of the coverage. A planned maintenance agreement with MCP can catch these issues before they become detrimental to the operation of your equipment while also performing scheduled maintenance procedures that will increase the life of your equipment.

Request Planned Maintenance

No Contracts required

No contract required – if ever you are dissatisfied with the service, the agreement can be canceled with a simple phone call – this motivates our technicians to earn your business on every trip.

No Contracts required

Your planned maintenance agreement, which includes over 50 checks and adjustments, will give you peace of mind and take a burden off of you and your company while keeping your cost to a minimum.

No Contracts required

Maintenance is performed by factory certified cleaning equipment experts. In fact, all of our technicians are Gold certified.

No Contracts required

Flexible plans – Visits can be scheduled monthly, bi-monthly, or quarterly and can be tailored to the use of your machine.

No Contracts required

Complete and separate service records are maintained and available for each machine.

No Contracts required

Reduce the chance of catastrophic failures with timely and thorough factory suggested maintenance.

No Contracts required

Keep your machine operating at its peak performance so it is ready when need it.

No Contracts required

Reduce downtime by noting potential problems before they cripple performance.

No Contracts required

Address operator errors that could damage the machine or cause excessive wear to consumables.

No Contracts required

There is no prepayment necessary and no billing occurs until the maintenance is performed.

Equipment Checks

Engine

  • check Fluid Levels
  • check Filter, Fuel lines & Fuel System
  • check Hoses & Belts
  • check Starting, Idle & Rated Speeds

Battery

  • check Battery Electrolyte Level Check
  • check Hydrometer Check (Specific Gravity)
  • check Connections Cleaned
  • check Charger Check

Drive System / Hydraulics

  • check Braking, Steering, Tires, Wheels & Casters
  • check Headlights, Gauges, & Accessories
  • check Hydraulic Hoses, Fittings, & Oil reservoir
  • check Lubrication of Grease Points

Sweeping / Scrubbing

  • check Inspection of Brooms & Brushes for Wear
  • check Actuation Test for Squeegees & Brushes
  • check Dust Control System, Filter & Shaker
  • check Rotation of Brushes & Test Pattern for Brooms

Other

  • check Inspection of Solution Flow and Filter
  • check Water Recovery System
  • check Rotation of Squeegee Blades as Needed
  • check Vacuum Motor Check