Advolution 2710 Ride on, battery powered burnisher

Rider Comfort and Increased Run-Time Our Advolution™ 2710 battery-powered rider burnisher makes large-area floor polishing easy, comfortable and productive. This machine is an ideal floor buffing solution for airport terminals, shopping centers, hospitals and more.

Benefits of Advolution 2710 Rider Burnishers The Advolution 2710 is designed around an easy-to-control and maneuver front steering system and unique One-Touch™ control pad for simple operation. The rider burnisher does the rest by automatically monitoring and controlling optimum pad pressure for a superior, consistent gloss, every time.

Superior gloss and maximum productivity

The Advolution 2710 rider-burnisher increases operator productivity with its ride-on capability and extended battery runtime. On average, battery runtime allows the operator to burnish over 30,000 square feet (2,800 meters) per hour. Maximum tested productivity is even higher, with results exceeding 135,000 square feet (12,500 meters) on a single battery charge.

  • Superior, consistent gloss with automatic pad-pressure control

  • Easy to control and maneuver with front-steering system

  • Perfect for daytime burnishing operating at just 69 dBA

  • Clean, quiet, battery-powered operation

  • Reduced need for dust-mopping with passive dust control


Pad Motor 3.25 hp
Pad Driver 27 in (68.6 cm) flexible pad driver with 3.5 in (9 cm) centering device.
Pad Motor Speed No load 1,760 RPM / Under load 1,500 RPM
Max Productivity @ 3.5 mph (5.6 km/hr) Per hour: 41,580 ft2 /hr (3,863 m2 /hr) Per battery charge: 137,214 ft² (12,748 m²)
Pad Access Pivoting burnishing head for easy pad access; safety switch prevents accidental startup when burnishing head is tilted up.
Pad Pressure Adjustment Variable between 3 settings; 50-75 lb. Electronic pad pressure system automatically controls consistency of pad pressure to maximize performance based on the setting selected.
Body Construction All steel chassis and rotational molded body. Steel burnishing head linkage and steering column.
Dust Control Passive dust control standard.
Drive System 1 hp, 700 W permanent magnet motor with gear transmission and non-marking wheel. 0-4.5 mph (0-7.2 km/hr) transport; 0-3.5 mph (0-5.6 km/hr) burnishing. Automatic electromechanical parking brake.
Wheels Two 12 in (30.5 cm) diameter non-marking rear wheels.
Power Source 6 - 6V DC / 420Ah Wet or 312Ah AGM Batteries
Operator Interface Tilt steering and adjustable seat with deadman safety switch.
Sound Level 69 dB A at operator position
Minimum Aisle Turn Width 72 in (183 cm)
Dimensions Length 65.5 in (166 cm) Height 54 in (137 cm) Width 32 in (81 cm)
Gross Weight Without batteries 484 lb (220 kg) / With batteries 1,379 lbs / 625 kg

Get in touch